Cheap Vertical Machining Center VMC650 Export To Russia

Cheap vertical machining center VMC650 is a vertical bed structure. The feed axis is X, Y, Z three-coordinate control. The main shaft is servo motor power drive. The VMC650 cheap vertical machining center has spindle motor with the power of 5.5Kw and the maximum speed is 8000rpm. This cheap vertical machining center is equipped with double nut pre-tightening C3 ball screw, and the positioning accuracy is ±0.01mm; it is also equipped with optional tool magazine, accurate and reliable tool change; the numerical control operating system has customer choice, the machine tool can realize various discs, plates, shells, cams, molds, And other complex parts. The cheap vertical machining center VMC650 is suitable for small and high-efficiency high-precision automatic machining. Teaching, aerospace, military and defense, automotive and motorcycle, construction machinery, refrigeration and petrochemical, and medium-sized parts in the field of rolling stock.

Our Russian customers needed low cost vertical machining centers. According to the size of the workbench, he told us that we chose the cheap vertical machining center VMC650 for him. After examining the parameters and configuration of the cheap vertical machining center VMC650, he confirmed that the machining center was right for him, but he wanted to use some of his requirements for the brand. Then we told him we could customize. In the end, he asked for an easy connection to the motor so that when they replaced the parts, we sent their connection type, and he said that we were simpler than he thought. He is very satisfied. Then he asked for the PI of the cheap vertical machining center VMC650, and a few days later he arranged the payment.

After the completion of the cheap vertical machining center VMC650, we invited him to accept the test. He said that he did not have time and was very satisfied with our machine. So we sent him a cheap vertical machining center VMC650 operating video and detail pictures. He is very happy to work with us.

Cheap Vertical Machining Center VMC650 features

★High rigidity: Cheap Vertical Machining Center VMC650 adopts the bed-type machining center structure. CNC machining center is composed of a base, sliding seat, work table, column, and headstock. The main basic parts are analyzed by finite element structure, the structure is reasonable and the rigidity is large; all machine tool castings are Thermal aging treatment, precision has long-term stability.

★CNC milling machine tool adopts high-speed, high-precision and high-rigidity spindle unit. 3 Axis Cheap Vertical Machining Center VMC650 spindle material is made of high-performance alloy steel. The high-speed precision bearing for the spindle is used, and high-speed grease is used. The spindle speed reaches 8000 rpm and the spindle radial runout is less than 0.008/300.

★X, Y, Z direction feed adopts C3 grade double nut preloaded precision ball screw. The servo motor is directly connected with the lead screw through high torque and low inertia imported elastic coupling to ensure positioning accuracy and repeat positioning accuracy.

Cheap Vertical Machining Center VMC650 Power and environmental requirements

1.Power supply and environmental requirements

1.1 Power supply voltage: 380V ± 10%

1.2 Power frequency: 50HZ ± 1%, three-phase

1.3 Gas source: 6kg/cm2 After proper drying

2.Environmental conditions for use

2.1 Relative humidity: ≤80%

2.2Ambient temperature: 0°C-40°C

2.3Air medium: non-corrosive medium

2.4 Light: adequate, well ventilated

2.5CNC machine for sale works stable for a long time under the above working conditions.

3.Installation site conditions

3.1Not affected by external vibration.

3.2Not affected by corrosive gases.

3.3Avoid direct sunlight on a machining center.

3.4Avoid direct contact with outside wind, air and temperature regulation of cold and hot air.

3.5Avoid setting heat sources such as heating near Cheap Vertical Machining Center.

3.6Reduce dust (avoid castings, welding, sheet metal workshops, etc.).

3.7Avoid water leakage and water immersion.

3.8Avoid electrical noise.

About HAISHU Machinery

As the professional CNC machine designer and manufacturer, Taian HAISHU Machinery Co., Ltd (Haishu Machinery) is the high-tech enterprise specialized in CNC machine development, production, sales and service since 2001. We have more than 30 professional talented CNC experts and more than 12,000 square meters manufacturing factory.  Our high quality and innovative products include CNC lathe, CNC milling machine, Cheap Vertical Machining Center, CNC turn-mill machine, CNC tool grinding machine, CNC pipe threading lathe, CNC wood lathe, stone CNC machine, CNC root canal file grinder and custom CNC equipment for special requirements.

HAISHU Machinery is not only manufacturing best quality Cheap Vertical Machining Center products but also providing custom product design and after sale services. Welcome, contact us for detailed information.